您现在的位置:首页铜线传输设备VDSL ADSL > CCPAM1011 vdsl2+ 支持点对点,支持互联互通
  • 产品名称: CCPAM1011 vdsl2+ 支持点对点,支持互联互通

CCPAM1011 VDSL2+ Modem
     CCPAM1011 VDSL2+是最新一代的vdsl产品,支持ITU的互联互通标准,支持与英飞凌、博通等公司的vdsl2+互联互通。支持华为、中兴局端,支持点对点使用,最远距离可以支持4.5公里,最高支持对称100M带宽。支持web管理,可以通过浏览器登陆,支持拨码开关设置主从。

Very High-speed Connectivity for Internet Access and IPTV Service

The CCPAM1011 is a single VDSL2 port modem equipped with four Ethernet ports by embedded 10/100Mbps Ethernet Switch. Compliant with ITU-T G.993.2 VDSL2 standard, the CCPAM1010 interoperates with major chipsets, and supports Profile 30a with line rate up to 100Mbps/100Mbps for various bandwidth-consuming applications, like video streaming or Video on Demand. Besides forwarding Ethernet packets between VDSL2 port and Ethernet ports, CCPAM1010 also provides Hardware IGMP snooping for IGMP v1/v2 to facilitate IPTV services without interfering with other applications.

Standard-compliant to ITU-T G.993.2

The CCPAM1011 complies with the international standards and interoperates with other major/open chipsets. It supports different profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a); different band plans (997, 998, and proprietary) and different annex types (Annex A, Annex B and Annex C), by factory settings to fit into different requirements. Benefit from the latest chip design technology, CCPAM 1010 consumes less power (less than 2 watt per VDSL2 port) and has shorter training time to make device up and running.

Long Reach Ethernet (LRE): Back-to-back Applications

In addition to using one CCPAM1011 to connect to ISP/Telco’s DSLAM for accessing Internet or video services, users can utilize a pair of CCPAM1010 for back-to-back applications. Theoretically the maximum length for Ethernet cable is within 100 meters. With two 1010 modems, users can have 100/100Mbps connectivity over a twisted-pair phone line up to 200 meters or longer. This capability can help users to bridge two distinct LAN segments in longer distance or to have surveillance service a little farther over existing twisted-pair phone cables.

Easy Installation

The CCPAM1011 is easy to use. Simply connect the hardware interfaces without the need for complicated configuration efforts, the device will synchronizes with VDSL2 DSLAM (VTU-O) in auto-negotiated mode and allow users to access the Internet or watch IPTV instantly.

 

Features & Specifications

VDSL2 Compliance

• Compliant with VDSL2 Standard, ITU-T G.993.2

• VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a

• Supports 997 and 998 Band Plans

• Supports Annex A, Annex B and Annex C

• Upstream/Downstream connection rates greater than 100/100Mbps

• OLR (On Line Reconfiguration), UB0 Supported

• Supports Ethernet 802.3ah

Network Protocols and Features

• Transparent bridging

• Ethernet over VDSL (EoVDSL) Bridging

• IEEE 802.3/3u compliant

• Hardware IGMP Snooping for IGMP v1/v2

Management

• Simple management function via console port

• Firmware upgradable (on demand)

Hardware Specifications

Physical Interface

• VDSL: one RJ-11 connector

• DIP Switch: DIP2 for configuring RT/COT mode

• Ethernet: 1-port 10/100Mbps auto-crossover (MDI / MDI-X) Switch

• Console:RS232, for management function

• Power jack

• Power switch

Physical Specifications

• Dimensions: (200mm x 145mm x 34mm)

Power Requirements

• Input: 12V DC, 1A

Operating Environment

• Operating temperature: 0 - 40 °C

• Storage temperature: -20 - 70 °C

• Humidity: 20 - 95% non-condensing

联系电话:021-50208577
邮箱:xzh1978@gmail.com
联系地址:上海浦东新区金皖路389号110室
页面版权所有- 康巴特实业发展(上海)有限公司 沪ICP备14005048号 中企动力提供网站建设